5

ITW DEVCON德复康双组分结构胶14167 TDS技术资料

最近又有网友咨询到DEVCON 14167结构胶产品,记得之前的文章有提到这款产品,参看《得复康DEVCON PUH94167 TDS》,之前也曾经尝试找过DEVCON 14167的官方技术资料,一直没有找到,只是在一些电子商务网站上有个别代理商贴出了部分技术参数。今天又抽空找了一下,果然在互联网上找到了官方的技术资料,贴在此处,大家共同学习之!  完整版PDF文件请到文章末尾下载。

Composite Welder FS

Description:      A 2-component 10:1 flexible methacrylate adhesive with fast fixturing and cure times.

Intended Use:   Bonds steel furniture, speaker magnets, and dissimilar substrates. Bonds FRP/GRP/SMC, gel coat, honeycomb painted and plated metals (with primer), phenolics, polycarbonate, PVC polyesters, urethanes and vinyl esters along with ceramics.

Product features:

Excellent environmental resistance

Excellent impact, peel, and shear resistance

Superb salt spray durability, including aluminum

Limitations: Technical data should be considered representative or typical only and should not be used for specification purposes.

Typical Physical Properties: 
Cured 7 days @ 75° F
T-peel                                                                                                 60-65 pli
Impact Resistance                                                                    22 ft.lb./in.[2]
Tensile Elongation                                                                   100-125%
Shore Hardness                                                                         74 Shore D
Gap-Fill                                                                                            .375 in.
% Solids by Volume                                                                  100 %
Adhesive Tensile Lap Shear [galvanized]               2,000 psi [with MP 90]
Adhesive Tensile Lap Shear[AL]                                   2,525 psi [with MP 90]
Adhesive Tensile Lap Shear[GBS]                                2,250 psi
Adhesive Tensile Lap Shear[SS]                                     2,800 psi [with MP 90]
Specfic Volume                                                                           28.55 in[3]/lb.

 

TESTS CONDUCTED
Adhesive Tensile Shear ASTM D 1002
Cured Hardness Shore D ASTM D 2240
T-Peel Strength ASTM D 1876
Impact Resistance ASTM D 950

Uncured 

Color                                                                    Blue/Green
Viscosity                                                           Adhesive: 120,000 cps:  Activator: 60,000 cps
Weight                                                                Adhesive:8.0/lbs./gal.; Activator: 8.95lbs./gal.
Mixed Viscosity                                            120,000 cps
Mix Ratio by Volume                                10:1
Mix Ratio by Weight                                   89:10
Mixed Density                                                8.09 lbs/gal / 0.97gm/cc
Flashpoint                                                         51°F
Working Time                                                4-8 min. @ 75°F
Fixture Time                                                   10-15 min. @ 75°F
Functional Cure                                            3/4 – 1  hrs.
Full Cure                                                              24 hours
Service Temperature                                 -40°F to 250°F

Surface  Preparation:Clean surface by solvent-wiping any deposits of heavy grease, oil, dirt, or other contaminants. Surface can also be cleaned with industrial cleaning equipment such as vapor phase degreasers or hot aqueous baths. If working with metal, abrade or roughen the surface to significantly increase the microscopic bond area and optimize the bond strength.

Mixing  Instructions:—- Proper homogenous mixing of resin and hardener is essential for the curing and development of stated strengths. —-

25 ML DEV-TUBE
1. Squeeze material into a small container the size of an ashtray.
2. Using mixing stick included on Dev-tube handle, vigorously mix components for one (1) minute.
3. Immediately apply to substrate.

35ML/50 ML/380ML/400 ML CARTRIDGES
1. Attach cartridge to Mark 5 dispensing system.
2. Open tip.
3. Burp cartridge by squeezing out some material until both sides are uniform (ensures no air bubbles are present during mixing).
4. Attach mix nozzle to end of cartridge.
5. Apply to substrate.

 

Application  Instructions:

1. Apply mixed product directly to one surface in an even film or as a bead.

2. Assemble with mating part within recommended working time.

3. Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of product should flow out the edges to display adequate gap fill).

4. Bond line thickness of mixed adhesive should be @ .030” for optimum adhesion.

For very large gaps:

1. Apply product to both surfaces.

2. Spread to cover entire area OR make a bead pattern to allow flow throughout the joint. Let bonded assemblies stand for recommended functional cure time prior to handling.

ADDITIONAL PRODUCT INFORMATION:

– Can withstand processing forces

– Do not drop, shock load, or heavily load

– Intermittent exposure to temperatures above 250°F do not reduce performance characteristics

STAINLESS STEEL AND ALUMINUM APPLICATIONS:

Apply Devcon Metal Prep 90 to prime and condition aluminum and stainless steel surfaces prior to using Compossite Welder FS. Metal Prep 90 is fast-drying at ambient temperatures. Composite Welder FS can be applied within minutes of its use. Overlap shear strength will improve 30-40% if Metal Prep 90 is used.

 Storage:Store between 55°F and 75°F.  Continuous storage above 75°F reduces the shelf life of the materials. Prolonged exposure above 100°F quickly diminishes the product’s reactivity, and should be avoided. Shelf life can be extended by refrigeration between 45°F and 55°F. DO NOT FREEZE.

Compliances:Meets UL 746C Polymeric Adhesive Systems, Electrical Equipment-Component

Chemical Resistance:  Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75°F)

Acetic (Dilute) 10% Very good
Ammonia Very good
Cutting Oil Excellent
Glycols/Antifreeze Excellent
Hydrochloric 10% Very good
Mineral Spirits Excellent
Motor Oil Excellent
Sodium Hydroxide 10%Sulfuric 10% Very good
Very good

 

Precautions:
Please refer to the appropriate material safety data sheet (MSDS) prior to using this product.
For technical assistance, please call 1-800-933-8266
FOR INDUSTRIAL USE ONLY

Warranty:  Devcon will replace any material found to be defective. Because the storage, handling and application of this material is beyond our control, we can accept no liability for the results obtained.

Disclaimer:     All information on this data sheet is based on laboratory testing and is not intended for design purposes. ITW Devcon makes no representations or warranties of any kind concerning this data.

Order 14167 35ml cartridge
Information: 14168 250 ml cartridge

 

华为网盘下载:http://dl.dbank.com/c0bty9wpij
注册本地下载:

  ITW DEVCON 14167 TDS (38.8 KB, 32 次)
您没有权限下载此文件。

 

豆瓣 腾讯微博 QQ空间 新浪微博

电子胶水达人!

已有 5 个评论

  1. avatar
    JACK
    2012/04/28 09:23

    下载文件权限是怎么申请的啊?我是胶水网的会员。你好,QIUZONG.

      • avatar
        anndi
        2012/04/30 11:49

        点击右下角用户登录处“register”注册后即可在本站下载资料了!

          • avatar
            WEI
            2013/08/29 11:12

            你好,我QQ819372272,我是做丙烯酸结构胶的,想和你聊聊。

              • avatar
                anndi
                2013/11/20 21:43

                交流下技术还行,聊客户啥的就…

          回复

          你必须 登录 才能发表评论.

            联系站长

            • Name:QiuBo QQ:1808976
              Email:Anndiqiu#Gmail.com
              Mobile Phone:13923499497

            热门文章

            添加站长微信,与站长在线实时交流

            QQ不在线时请用微信

          链接