大声
【扒一扒】日本高纯球形硅微粉材料生产商
—— anndi

《【扒一扒】日本高纯球形硅微粉材料生产商》:  作为一种无机非金属矿物功能性粉体材料,硅微粉广泛应用于电子材料、电工绝缘材料、胶黏剂、特种陶瓷、精密铸造、油漆涂料、油墨、硅橡胶等领域。 目前,世界上只有中国、日本、韩国、美国等少数国家具备硅微粉生产能力... 全文 ?

1

Norland Optical Adhesive 65 TDS

Norland Optical Adhesive 65 (“NOA65”) is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids,it offers many advantages in bonding of optical materials where the bonding surface can be exposed to light. The use of NOA 65 eliminates premixing, drying and heat curing operations common to other optical adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.

The cured adhesive is very flexible and was designed to minimize strain. NOA 65 is especially suitable where the adhesive cross section would be relatively thick. NOA 65 has enough elasticity to keep strain to a minimum even when dissimilar materials with different coefficients of expansion are bonded together. Typical applications would be potting of lenses in metal mounts, bonding plastic to glass and cold blocking.

NOA 65 is cured by ultraviolet light with a maximum absorption within the range of 350-380 nanometers. The recommended energy required for full cure is 4.5 Joules/sq. cm of long wavelength UV light. The polymer has minimum oxygen inhibition, and therefore any surfaces in contact with air will be non-tacky when fully cured.

For cleanup of the adhesive, acetone can be used if the cure has not progressed to far. If fully cured, methylene chloride can be used to soak assemblies apart.  

 

Typical Properties of NOA 65

Solids 100%
Viscosity at 25° C 1200 cps
Refractive Index of Cured Polymer 1.524
Elongation at Failure 80%
Modulus of Elasticity (psi) 20,000
Tensile Strength (psi) 1,500
Hardness – Shore D 50
Temperature Range -15 to 60° C

Some of the light sources that can be used to cure the adhesive are sunlight, mercury lamps, and fluorescent blacklights.

Typical Cure Times

LIGHT SOURCE FILM THICKNESS PRECURE FULL CURE
100 Watt Mercury* Spot Lamp at 6 inches 1-10 mil  15 seconds 5 minutes
2-15 Watt Fluorescent* Black Lights at 3 inches 1-10 mil 60 Seconds 20 minutes

*Distributed by Norland Products Inc.

Shelf life of the liquid is at least 6 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Care should be taken in handling this material. The Material Safety Data Sheet should be read for this product as well as for any associated products such as alcohol, acetone or methylene chloride. Prolonged contact with skin should be avoided and affected areas should be thoroughly washed with copious amounts of soap and water. If the adhesive gets into the eyes, flush with water for 15 minutes and seek medical attention. Use the material in a well ventilated area, otherwise a NIOSH approved organic vapor mask is recommended.

 

Spectral Transmission of NOA 65
 

点击下载TDS资料:

  Norland Optical Adhesive 65 (35.8 KB, 7 次)
您没有权限下载此文件。

    联系站长

    • Name:QiuBo QQ:1808976
      Email:Anndiqiu#Gmail.com
      Mobile Phone:13923499497

    热门文章

    添加站长微信,与站长在线实时交流

    QQ不在线时请用微信

链接