{"id":3104,"date":"2012-06-30T22:51:07","date_gmt":"2012-06-30T14:51:07","guid":{"rendered":"http:\/\/www.g4e.cn\/wordpress\/?p=3104"},"modified":"2013-11-19T14:32:31","modified_gmt":"2013-11-19T06:32:31","slug":"henkel-hysol-e1470-tds-msds","status":"publish","type":"post","link":"http:\/\/www.g4e.cn\/wordpress\/datasheet\/3104.html","title":{"rendered":"HENKEL HYSOL E1470 TDS&MSDS"},"content":{"rendered":"

\u627e\u5230\u8fd9\u6b3e\u4ea7\u54c1\u662f\u56e0\u4e3a\u6709\u4e2a\u5ba2\u6237\u54a8\u8be2\u5230LCP\u6750\u6599\u7684\u7c98\u63a5\uff0c\u6211\u5728\u7f51\u4e0a\u627e\u4e86\u534a\u5929\uff0c\u540e\u6765\u53d1\u73b0hysol\u8fd9\u6b3e\u4ea7\u54c1\u662f\u4e13\u95e8\u9488\u5bf9LCP\u53ca\u6709\u673a\u7845\u7c98\u63a5\u7684\u578b\u53f7\uff0c\u4e0d\u8fc7\u6b64\u80f6\u6c34\u8d44\u6599\u663e\u793a\u7684\u662f\u73af\u6c27\u4f53\u7cfb\u7684\u3002 \u5173\u4e8eLCP\u6750\u6599\uff0c\u7f51\u4e0a\u7684\u5185\u5bb9\u4e5f\u4e0d\u662f\u592a\u591a\uff0c\u7b80\u5355\u7406\u89e3\u6210\u4e3a\u6db2\u6676\u805a\u5408\u7269\uff0c\u5173\u4e8eLCP\u7f51\u4e0a\u641c\u96c6\u4e86\u4e00\u4e9b\u8d44\u6599\uff0c\u4f1a\u5728\u53e6\u4e00\u7bc7\u535a\u5ba2\u4e2d\u518d\u8be6\u8ff0\uff0c\u5148\u5c06\u6b64\u4efd\u8d44\u6599\u6458\u5f55\u5982\u4e0b\uff0c\u6709\u5174\u8da3\u7684\u670b\u53cb\u53ef\u4ee5\u4e0b\u8f7d\u9644\u4ef6\u67e5\u770b\u4e4b\uff1a<\/p>\n

 <\/p>\n

PRODUCT DESCRIPTION
\nE1470 provides the following product characteristics:<\/p>\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n
Technology<\/span><\/td>\nEpoxy<\/span><\/td>\n<\/tr>\n
Appearance<\/span><\/td>\nOff-white<\/span><\/td>\n<\/tr>\n
Components<\/span><\/td>\nOne-component<\/span><\/td>\n<\/tr>\n
Product Benefits<\/span><\/td>\n\u2022 Thermosetting
\n<\/span>\u2022 B-Stageable
\n<\/span>\u2022 Controlled particle size
\n<\/span>\u2022 Controlled rheology
\n<\/span>\u2022 Sag resistant
\n<\/span>\u2022 Excellent adhesion
\n<\/span>\u2022 Non-conductive<\/span><\/td>\n<\/tr>\n
Cure<\/span><\/td>\nHeat Cure<\/span><\/td>\n<\/tr>\n
Application<\/span><\/td>\nAssembly<\/span><\/td>\n<\/tr>\n
Surfaces<\/span><\/td>\nLCP, Silicon, Metals, Aluminum and Plastics<\/td>\n<\/tr>\n
Typical Package Application<\/td>\nComponent attach and Lid seal<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

E1470 adhesive is designed for component attach and lid seal\u00a0applications. E1470 can be applied by syringe dispense\u00a0and cured in conventional batch oven or continuous IR\u00a0convection oven at low temperatures.
\nTYPICAL PROPERTIES OF UNCURED MATERIAL
\nViscosity , AR 1000, mPa\u2219s (cP) \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 12,000
\nShear Thinning Index (Rheometer) \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a02.1
\nShelf Life: \u00a0@ -20\u00baC (wet), months \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a03
\nPot Life:\u00a0@ 25\u00baC (wet), weeks \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a01
\n@ 25\u00baC (dry), months \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 1
\nFlash Point – See MSDS
\nTYPICAL CURING PERFORMANCE
\nRecommended B-Stage Condition \u00a0 \u00a0 \u00a0 \u00a0\u00a045 minutes @ 100\u00b0C – Batch
\nCure Schedule \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a05 minutes @ 180\u00b0C
\nThe above cure profiles are guideline recommendations. Cure\u00a0conditions (time and temperature) may vary based on customers’\u00a0experience and their application requirements, as well as customer\u00a0curing equipment, oven loading and actual oven temperatures.
\nTYPICAL PROPERTIES OF CURED MATERIAL
\nPhysical Properties:
\nGlass Transition Temperature ,DMA, \u00b0C \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 85
\nThermal Conductivity, W\/mk \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 0.2
\nWater Absorption, %: \u00a085\u00b0C\/85 RH \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a02
\nThermal Decomposition TGA, \u00b0C \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0300<\/p>\n

TYPICAL PERFORMANCE OF CURED MATERIAL
\nLap Shear Strength :
\nLCP \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0N\/mm\u00b2 13 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0(psi) (1,900)
\nGold \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0N\/mm\u00b2 17 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0(psi) (2,500)
\nCeramic \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 N\/mm\u00b2 16.5 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0(psi) (2,400)<\/p>\n

PERFORMANCE AND RELIABILITY DATA
\nGross Leak Results \u00a0\u00a01,000 hours, 85\u00b0C\/85 RH, 150\u00b0C \u00a0 \u00a0\u00a0Pass<\/p>\n

GENERAL INFORMATION
\nFor safe handling information on this product, consult the\u00a0Material Safety Data Sheet, (MSDS).
\nTHAWING:
\n1. Allow material to reach room temperature before use.
\nDIRECTIONS FOR USE
\n1. E1470 is sag resistant and can be dispensed on vertical\u00a0surfaces like the edge of a lid.
\n2. B-stage using a conventional batch oven, then cure in a\u00a0batch oven or continuous IR convection oven.
\n3. E1470 can be dispensed on the underside of a lid or\u00a0component and dried to tack-free. In this state, the\u00a0pre-applied adhesive can be stored and\/or shipped to\u00a0another location for attachment.
\nNot for product specifications
\nThe technical data contained herein are intended as reference\u00a0only. Please contact your local quality department for\u00a0assistance and recommendations on specifications for this\u00a0product.
\nStorage
\nStore product in the unopened container in a dry location.\u00a0Storage information may be indicated on the product container\u00a0labeling.
\nOptimal Storage: -20 \u00b0C
\nMaterial removed from containers may be contaminated during\u00a0use. Do not return product to the original container. Henkel\u00a0Corporation cannot assume responsibility for product which\u00a0has been contaminated or stored under conditions other than\u00a0those previously indicated. If additional information is required,\u00a0please contact your local Technical Service Center or\u00a0Customer Service Representative.<\/p>\n

Conversions
\n(\u00b0C x 1.8) + 32 = \u00b0F
\nkV\/mm x 25.4 = V\/mil
\nmm \/ 25.4 = inches
\nN x 0.225 = lb
\nN\/mm x 5.71 = lb\/in
\nN\/mm\u00b2 x 145 = psi
\nMPa x 145 = psi
\nN\u00b7m x 8.851 = lb\u00b7in
\nN\u00b7m x 0.738 = lb\u00b7ft
\nN\u00b7mm x 0.142 = oz\u00b7in
\nmPa\u00b7s = cP
\nNote
\nThe data contained herein are furnished for information only\u00a0and are believed to be reliable. We cannot assume\u00a0responsibility for the results obtained by others over whose\u00a0methods we have no control. It is the user’s responsibility to\u00a0determine suitability for the user’s purpose of any production\u00a0methods mentioned herein and to adopt such precautions as\u00a0may be advisable for the protection of property and of persons\u00a0against any hazards that may be involved in the handling and\u00a0use thereof. In light of the foregoing, Henkel Corporation\u00a0specifically disclaims all warranties expressed or implied,\u00a0including warranties of merchantability or fitness for a\u00a0particular purpose, arising from sale or use of Henkel\u00a0Corporation\u2019s products. Henkel Corporation specifically\u00a0disclaims any liability for consequential or incidental\u00a0damages of any kind, including lost profits. The discussion\u00a0herein of various processes or compositions is not to be\u00a0interpreted as representation that they are free from\u00a0domination of patents owned by others or as a license under\u00a0any Henkel Corporation patents that may cover such\u00a0processes or compositions. We recommend that each\u00a0prospective user test his proposed application before repetitive\u00a0use, using this data as a guide. This product may be covered\u00a0by one or more United States or foreign patents or patent\u00a0applications.<\/p>\n

 <\/p>\n

\u534e\u4e3a\u7f51\u76d8\u4e0b\u8f7d\uff1ahttp:\/\/dl.dbank.com\/c03qb0ixi8<\/a><\/p>\n

\u6ce8\u518c\u672c\u5730\u4e0b\u8f7d\uff1a

\"\"  henkel hysol E1470 TDS&MSDS<\/strong> (98.2 KB, 10 \u6b21)
\u60a8\u6ca1\u6709\u6743\u9650\u4e0b\u8f7d\u6b64\u6587\u4ef6\u3002<\/i><\/p><\/p>\n","protected":false},"excerpt":{"rendered":"

\u627e\u5230\u8fd9\u6b3e\u4ea7\u54c1\u662f\u56e0\u4e3a\u6709\u4e2a\u5ba2\u6237\u54a8\u8be2\u5230LCP\u6750\u6599\u7684\u7c98\u63a5\uff0c\u6211\u5728\u7f51\u4e0a\u627e\u4e86\u534a\u5929\uff0c\u540e\u6765\u53d1\u73b0hysol\u8fd9\u6b3e\u4ea7\u54c1\u662f\u4e13\u95e8\u9488\u5bf9LCP […]<\/p>\n","protected":false},"author":1,"featured_media":3736,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[667],"tags":[629,628,626,627],"_links":{"self":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts\/3104"}],"collection":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/comments?post=3104"}],"version-history":[{"count":0,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts\/3104\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/media\/3736"}],"wp:attachment":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/media?parent=3104"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/categories?post=3104"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/tags?post=3104"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}