{"id":3083,"date":"2012-05-28T23:03:12","date_gmt":"2012-05-28T15:03:12","guid":{"rendered":"http:\/\/www.g4e.cn\/wordpress\/?p=3083"},"modified":"2013-11-19T14:38:31","modified_gmt":"2013-11-19T06:38:31","slug":"of-delo-monopox-1197-construction-the-adhesive-tds","status":"publish","type":"post","link":"http:\/\/www.g4e.cn\/wordpress\/datasheet\/3083.html","title":{"rendered":"DELO MONOPOX 1197 Construction Adhesive TDS"},"content":{"rendered":"
\n

DELOMONOPOX\u00ae 1197<\/p>\n

heat curing, construction adhesive<\/p>\n

B<\/span><\/strong>ase<\/span><\/strong><\/p>\n

–\u00a0\u00a0 epoxy resin, construction adhesive<\/p>\n

–\u00a0\u00a0 one-component, heat-curing, filled<\/p>\n

U<\/span><\/strong>se<\/span><\/strong><\/p>\n

–\u00a0\u00a0 for the bonding of all metal types, temperature-resistant plastic, ferrite and ceramic<\/p>\n

–\u00a0\u00a0 especially for high-strength, tough-hard bondings with very high static and dynamic loading capacity, even at increased temperatures<\/p>\n

–\u00a0\u00a0 for bondings requiring a high run resistance<\/p>\n

–\u00a0\u00a0 the product is normally used in a temperature range of -55 \u00b0C to +200 \u00b0C; depending on the application, other limits may be more reasonable<\/p>\n

–\u00a0\u00a0 compliant with RoHS directive 2002\/95\/EC<\/p>\n

P<\/span><\/strong>r<\/span><\/strong>ocessing<\/span><\/strong><\/p>\n

–\u00a0\u00a0 to heat the components, increased temperatures can be used, as well<\/p>\n

–\u00a0\u00a0 the heating time of the components must be added to the actual curing time<\/p>\n

–\u00a0\u00a0 for curing, the inside of the adhesive layer must have the required temperature<\/p>\n

–\u00a0\u00a0 depending on the adhesive amount used, exothermic reaction heat is developed which can lead to overheating; in this case, the curing temperature must be reduced accordingly<\/p>\n

–\u00a0\u00a0 the adhesive is supplied ready for use and can be processed well from the original container or with DELO dispensing units<\/p>\n

–\u00a0\u00a0 the surfaces to be bonded must be dry as well as free of dust, grease and other contaminations<\/p>\n

–\u00a0\u00a0 use DELOTHEN cleaners for the cleaning of bonding surfaces<\/p>\n

–\u00a0\u00a0 adhesion to the components can be improved by sand blasting, grinding or pickling<\/p>\n

C<\/span><\/strong>uring<\/span><\/strong><\/p>\n

–\u00a0\u00a0 curing proceeds at temperatures between +130 and +180 \u00b0C<\/p>\n

–\u00a0\u00a0 increased temperatures shorten the curing process, lower temperatures extend it, and can change the properties of the cured product<\/p>\n<\/div>\n

Technical data<\/strong>
\nColor \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 silver grey
\nFiller \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 aluminum
\nDensity [g\/cm\u00b3] \u00a0at room temperature (approx. 23 \u00b0C) \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a01.4
\nViscosity [mPas]\u00a0at 23 \u00b0C, Brookfield rpm 7\/5 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0pasty
\nProcessing time \u00a0\u00a0at room temperature (max. 25 \u00b0C) \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a06 weeks<\/p>\n

Curing time until final strength [min] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 75
\nat 130\u00b0C in a convection oven
\nCuring time until final strength [min] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 40
\nat 150 \u00b0C in an air convection oven
\nCuring time until final strength [min] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a015
\nat 180 \u00b0C in an air convection oven
\nTensile shear strength Al\/Al [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 26
\nDIN EN 1465, sand-blasted
\ncomponent thickness: 1.6 mm
\nafter 40 min at +150 \u00b0C
\nTensile shear strength Al\/Al [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 55
\nDELO Standard 39, sand-blasted
\ncomponent thickness: 6 mm
\nafter 40 min at +150 \u00b0C<\/p>\n

Floating roller peel resistance St\/St [N\/mm] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 12
\nDELO Standard 38, sand-blasted
\ncomponent thickness: 1.5 mm
\nTemperature stability Al\/Al at +50 \u00b0C [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 33
\naccording to DIN EN 1465, sand-blasted
\ncomponent thickness: 1.6 mmm
\nTemperature stability Al\/Al at +100 \u00b0C [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 22
\naccording to DIN EN 1465, sand-blasted
\ncomponent thickness: 1.6 mm
\nTemperature stability Al\/Al at +150 \u00b0C [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 5
\naccording to DIN EN 1465, sand-blasted
\ncomponent thickness: 1.6 mm<\/p>\n

Tensile strength [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 40
\naccording to DIN EN ISO 527
\nlayer thickness: 2 mm
\nafter 40 min at +150 \u00b0C
\nElongation at tear [%] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a01.4
\naccording to DIN EN ISO 527
\nlayer thickness: 2 mm
\nafter 40 min at +150 \u00b0C
\nYoung’s modulus [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a03300
\naccording to DIN EN ISO 527
\nlayer thickness: 2 mm
\nafter 40 min at +150 \u00b0C
\nShore hardness D \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 67
\naccording to DIN EN ISO 868
\nafter 40 min at +150 \u00b0C
\nDecomposition temperature [\u00b0C] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 280
\nDELO Standard 36
\nBall indentation hardness [MPa] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a095
\nISO 2039, part 1
\nGlass transition temperature [\u00b0C] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0140
\nrheometer
\nCoefficient of linear expansion [ppm\/K] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 93
\nTMA, in a temperature range of +25 to +140 \u00b0C
\nCoefficient of linear expansion [ppm\/K] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 65
\nTMA, in a temperature range of +30 to +90 \u00b0C
\nCoefficient of linear expansion [ppm\/K] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0171
\nTMA, in a temperature range of +130 to +150 \u00b0C
\nShrinkage [vol. %] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 3.0
\nDELO Standard 13
\nWater absorption [weight %] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a00.1
\naccording to DIN EN ISO 62
\nafter 40 min at +150 \u00b0C
\nDielectric strength [kV\/mm] \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 2<\/p>\n

VDE 0303, part 2, after 40 min at +150 \u00b0C
\nDielectric constant \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 3.6
\nVDE 0303, part 4, after 40 min at +150 \u00b0C
\nCreep resistance CTI \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0125M
\nVDE 0303, part 1, IEC 112, after 40 min at +150 \u00b0C
\nStorage life at 0 \u00b0C to +8 \u00b0C \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a06 months
\nin unopened original container<\/p>\n

I<\/span><\/strong>nstructions and advice<\/span><\/strong><\/p>\n

General<\/p>\n

The data and information provided are based on tests performed under laboratory conditions. Reliable information about the behavior of the product under practical conditions and its suitability for a specific purpose cannot be concluded from this.<\/p>\n

Many product properties are subject to temperature and may change permanently, especially at high temperatures.<\/p>\n

It is the user\u2019s responsibility to test the suitability of the product for the intended purpose and temperature range of use by considering all specific requirements. Type and physical and chemical properties of the materials to be processed with the product, as well as all actual influences occurring during transport, storage, processing and use, may cause deviations in the behavior of the product<\/p>\n

compared to its behavior under laboratory conditions. All data provided are typical average values or uniquely determined parameters<\/p>\n

measured under laboratory conditions.<\/p>\n

The data and information provided are, therefore, no guarantee for specific product properties or the suitability of the product for a specific purpose.<\/p>\n

Instructions for use<\/p>\n

The instructions for use of DELOMONOPOX are available on: www.DELO.de. <\/a>We will be pleased to send them to you on demand.<\/p>\n

Occupational health and safety<\/p>\n

see material safety data sheet<\/p>\n

Specification<\/p>\n

see quality assurance test report<\/p>\n

 <\/p>\n

\u534e\u4e3a\u7f51\u76d8\u4e0b\u8f7d:\u00a0http:\/\/dl.dbank.com\/c0kpy24m9x<\/a><\/p>\n

\u6ce8\u518c\u672c\u5730\u4e0b\u8f7d:

\"\"  DELO_MONOPOX_1197<\/strong> (167.0 KB, 7 \u6b21)
\u60a8\u6ca1\u6709\u6743\u9650\u4e0b\u8f7d\u6b64\u6587\u4ef6\u3002<\/i><\/p><\/p>\n","protected":false},"excerpt":{"rendered":"

DELOMONOPOX\u00ae 1197 heat curing, construction adhesive Ba […]<\/p>\n","protected":false},"author":1,"featured_media":3740,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[667],"tags":[611,12,610,609],"_links":{"self":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts\/3083"}],"collection":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/comments?post=3083"}],"version-history":[{"count":0,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/posts\/3083\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/media\/3740"}],"wp:attachment":[{"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/media?parent=3083"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/categories?post=3083"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.g4e.cn\/wordpress\/wp-json\/wp\/v2\/tags?post=3083"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}